Installation of (1st generation only) Invenio-5SIII and Invenio-10SIII device drivers
•Do not attach the camera yet.
•Install the DeltaPix InSight
•Follow this procedure to manually install device drivers for the Invenio-5SIII and Invenio-10SIII cameras.
Launch the Setup_InvenioIIIeb_a.b.c installer Note: a.b.c is the version number of the installation program, and may change. |
|
Click next to start the installation. |
|
Click 'Install' to install the device software. |
|
Click 'Finish'. |
|
Click 'Finish'.
Now attach the camera to a vacant USB3 (or optionally a USB2) port.
Is is NOT recommended to connect via a USB hub.
Let the camera install - may take a few minuttes.
|
|
The camera should now appear in the Device Manager as Invenio-5SIII or Invenio-10SIII |
|
If the camera does not install correctly, please contact [email protected] |
|
