DeltaPix InSight can control most motorized/encoded microscopes.
Version 3.2+ can control or listen to:
•Objective changer
•Tubelens turret changer
•Reflector changer
•The Reflected Light Shutter
In order to make calibration work, one trick is necessary:: You will also need to define the objectives in the optics editor – and in the SAME order as in the "Objective” drop down menu.
The order in the "objective" drop down is determined by the MTB2011.
Then selecting another objective from this drop down, will also change the objective on the microscope.
NOTE: Requires a well configured MTB2011 server. See Installing and connecting to Zeiss MTB 2011