Some motorized zoom objectives are partially calibrated by DeltaPix prior delivery.
The calibration and zoom motor information is delivered as an objectivename.mzm.xml file. This file must be associated with the objective in the optics editor.
In the open file dialog, select the (as example) Navitar_6x.mzm.xml
This associates the motor-zoom-model file to the objective calibration.
Example optics configuration - the x1 is a motorized zoom objective with an associated description file. The file holds information on:
•Zoom range and zoom profile.
•Motor run and hold current.
•Limit switch polarity.
•Predefined click stops.
•Motor speed [steps/sec]