Before connecting, the appropriate COM port must be selected.
Normally the COM port will have friendly name "TANGO"
STAGE XY EXAMPLE CONFIGURATION: XY-AXIS 315 STEPS/MM, 200 STEPS/REV MOTOR.
NOTE: FOR THE LIMIT SWITCH OPTION YOU MAY SELECT NONE, THEN THE DEFAULT OPTION (AS SEEN IN THE MÄRZHÄUSER SWITCHBOARD) IS USED.
When connection is successfully established, the icon will change,
and the serial number of the MÄRZHÄUSER TANGO will be shown in the top of the form.
NOTE: THE BAUD RATE SELECTION MAY HAVE MOVED TO THE CONNECT BUTTON.
After this, the DeltaPix InSight will automatically connect to
the MÄRZHÄUSER TANGO when the program is started.
THE MOTOR POWER OPTION MUST BE CAREFULLY DEFINED TO MATCH THE MOTORS.
NOTE:
1.USING USB CONNECTION, THE BAUD RATE IS OBSOLETE.
2.USING RS232 WILL REQUIRE A SANE BAUD RATE